EN / 中文
Products

Parts that fit the first time.

Four product families, all built around one rule: a replacement part must bolt on without touching anything else on the rig.

01 / Mud Systems

JSB Sand Pump Series

A direct replacement for Mission Magnum, dimension for dimension. Hard cast iron shell, labyrinth seal and IEC Ex-proof motor — built for slurry that eats ordinary pumps.

ParameterValue
Maximum speed1,750 rpm
Flow rate40 – 320 m³/h
Head24 – 38 m
Motor power7.5 – 90 HP
Interchangeability100% mechanical and dimensional with Mission Magnum
PerformanceMeets 80% of original brand level
SealingLabyrinth seal, zero leakage
JSB sand pumps
JSB sand pump units ready for shipment, Chengdu.
01 / Mud Systems

HA-15J Mud Agitator

High torque, low vibration, designed for dense slurry where ordinary agitators stall or shake themselves apart.

  • 200+ units currently in service with KCAD Saudi and ABRAJ
  • Gearbox and impeller sized for weighted mud, not clean water
  • Drop-in mounting footprint for existing pit layouts
HA-15J mud agitator
HA-15J agitators in the assembly bay.
02 / Forged Power End

Fluid Ends

Suction and discharge fluid ends in high-strength forged alloy steel, fully CNC machined so the bore alignment is right before the first stroke — not after the third failure.

ItemSpecification
MaterialHigh-strength forged alloy steel
ProcessIntegral drop-forging, full 5-axis CNC
InspectionNDT on all critical pressure-bearing surfaces
Life vs. casting3 – 5× longer in abrasive service
Forged fluid end
Machined fluid end, pre-assembly inspection.
02 / Forged Power End

Crankshafts, Gears & Bearing Components

Integral drop-forging eliminates the porosity that turns into a fatigue crack at 1,700 rpm. Tooth profiles are hardened and ground to reduce pitting and noise.

  • Integral drop-forged blanks — no welded or cast-up webs
  • Ground tooth profiles — lower pitting risk, lower noise
  • Gear rings and pinions matched as a set, not sold loose
Gear ring
Ground gear ring for a mud pump power end.
02 / Forged Power End

Liners, Valves & Pulsation Dampeners

Ceramic liners for maximum abrasion resistance, bi-metal liners where budget and durability have to meet in the middle. All wear surfaces are hardened and inspected before dispatch.

ItemOptions
LinersCeramic (max. abrasion) · Bi-metal (cost-balanced)
Valves & seatsSurface-hardened, OEM-dimension compatible
Pulsation dampenerHydril type, forged shell, ASME standard, third-party certified
Valves and liners
Valve and seat assemblies, stock held for Gulf delivery.
03 / Lifting & Ex-Proof

BOP Handling Systems

80, 120 and 160-ton BOP handling winches with integrated hydraulic power unit. Fifteen complete systems delivered to KCAD Saudi and still in service.

ItemSpecification
Capacity80 t · 120 t · 160 t
ComplianceAPI 16A / 16D
Power unitIntegrated HPU, load tested before dispatch
Track record15+ complete systems delivered to KCAD Saudi
Equipment installed on site
Modular units installed and commissioned on site.
03 / Lifting & Ex-Proof

Explosion-Proof Electrical Systems

Lighting, distribution and control equipment certified for Zone 1, Zone 2, Zone 21 and Zone 22 — supplied as one tested, documented system.

ProductKey data
Ex-proof LED lightingHRNT95 / BAT86 · IECEx, ATEX, CENELEC, NEC · 80–300 W · 60°/90° · 100,000 h
Distribution boxesBXM(D)81 · Ex d IIB+H2 · copper-free aluminium
Distribution panelsHRMD91 · flameproof, combinable
Terminal boxesBXJ · Ex e / Ex d IIB / Ex d IIC · aluminium or stainless
Empty enclosuresBXT · IP66 · −60 °C to +100 °C
Installed base400+ lighting units across KCAD Saudi, Oman and ABRAJ
Explosion-proof components in stock
Ex-proof components held in stock for rig shutdowns.
03 / Lifting & Ex-Proof

Fire Suppression & Alarm Systems

Skid-mounted fire stations, mobile dry-powder trolleys and wireless cluster alarm systems for rig floors, pipe racks and living quarters.

SystemSpecification
ZPM200 skid station15 m³ water + 5 m³ foam · 80 L/s monitor · 75 m throw · 147 kW diesel · −30 to +75 °C
ZPM340 platform station32 m³ water + 1.64 m³ foam · dual 90 kW electric + 94 kW diesel · SCH80 piping
Dry powder trolley500 / 750 / 1,000 kg · 32 m jet · 31 kg/s · nitrogen propelled
Alarm systemDMS-SLA-Z host + DMS-SLA-F sub · EN 54-7 smoke · EN 54-5 heat · 180 dB sound/light
Mobile dry powder fire trolley
Mobile dry-powder fire trolley, 500–1,000 kg.
04 / Drilling Spares

OEM-Grade Spares, Without the OEM Lead Time

We hold and machine spares for the pump families that dominate Gulf rig fleets. Same dimensions, same metallurgy where it matters, a fraction of the wait.

  • NOV P Series — fluid ends, valves, liners, pistons
  • LS NOV F Series — power end components
  • Weatherford F Series — fluid end and wear parts
  • BOMCO F Series — full component range
  • HH F Series — full component range

We act as single-source integrator for BOMCO, HH, LS, Weatherford and NOV — one purchase order, one quality file, one point of accountability.

Body worn through as well? That is a re-manufacturing job — see Services.

Chrome-plated liners and pistons
Chrome-plated liner and piston stock.

Part number obsolete?

Send the pump model and whatever is stamped on the nameplate. If it is still running in the Gulf, we have probably made it before.